Free CCNA Lab IPV6 Frame-Relay







In this Free CCNA Lab you will configure three routers in a simple IPv6 hub and spoke Frame-Relay configuration. The Frame-Relay switch has already been configured. You will need to configure the routers using the predefined DLCIs. Routing will be established using static routing. Finally you will use the Show and Ping commands verify and test the configuration and connectivity of the network.

Objectives:

  • Enable IPv6 Unicast Routing.
  • Configure IPv6 addresses.
  • Configure Frame-Relay.
  • Verify the IPv6 configuration.

Frame Relay is used as a way to offer multiple service levels for a customer link. The IPv6 over Frame Relay feature allows users to configure IPv6 addresses over Frame Relay physical interfaces and subinterfaces.

Configuring Frame Relay Encapsulation on the Main IPv6 Interface.
 
SUMMARY STEPS :

  1. enable
  2. configure terminal
  3. interface type number
  4. ipv6 address {ipv6-address/prefix-length | prefix-name sub-bits/prefix-length}
  5. encapsulation frame-relay [cisco | ietf]
  6. frame-relay intf-type [dce | dte | nni]

Configuring Frame Relay on an IPv6 Subinterface
This task can be performed on as many subinterfaces as necessary to configure your system.

SUMMARY STEPS:

  1. enable
  2. configure terminal
  3. interface type number
  4. encapsulation frame-relay [cisco | ietf]
  5. frame-relay intf-type [dce | dte | nni]
  6. interface type number
  7. ipv6 address {ipv6-address/prefix-length | prefix-name sub-bits/prefix-length}
  8. frame-relay interface-dlci dlci [ietf | cisco] [voice-cir cir] [ppp virtual-template-name]

Search for Additional IPV6 Labs: [adsense_id=”4″]

  IPV6-Frame-Relay (146.2 KiB, 4,023 hits)

  Packet Tracer 5-3-3 By Cisco (48.3 MiB, 1,934 hits)
You do not have permission to download this file.

You can leave a response, or trackback from your own site.

One Response to “Free CCNA Lab IPV6 Frame-Relay”

  1. Vlada says:

    Hi guys,I paessd CCNA in 2008 and then paessd CCIP in 2010/Also cleared 1v5 paper BSCI of CCNP.My CCNA is expired now also CCIP.How can I get recertified?which exam do I need to take to get recertified?CCNA or CCNP any 642(Switch or TSHOOT).I am confused now. can anybody here let me know, please.Cheers

Leave a Reply

What is 3 + 14 ?
Please leave these two fields as-is:
IMPORTANT! To be able to proceed, you need to solve the following simple math (so we know that you are a human) :-)

*

Powered by WordPress | Designed by: backlinks | Thanks to internet marketing, etiketten drucken and index backlink