The purpose of this lab is to demonstrate some of the new capabilities and devices in Cisco’s Packet Tracer 6.2. The new devices include 3/G and 4/G Cell Tower with a Central Office Server, Cisco’s 819 Integrated Service Router (ISR) with 3G/4G connectivity, and a wired Packet Sniffer.
Posted in CCNA, Packet Tracer, Routing, Security 
Tags: CCNA, CCNP, Certification, Cisco, Labs, Packet Tracer, Pratice, Test, Training 
7 Comments »
In this lab activity, you will create a network that is similar to the one shown in the Topology Diagram. Begin by perform the initial router configurations required for connectivity. Use the IP addresses that are provided in the network diagram to apply an addressing scheme to the network devices. After completing the basic configuration, […]
Posted in Routing, WAN Tags: CCNA, Cisco, EIGRP, Encapsulation, HDLC, Labs, Packet Tracer, Point-tp-Point, Routing, Scenarios 3 Comments »
In this Free CCNA LAB Four routers must be interconnected in a hub-and-spoke Frame Relay configuration. Router R1 is the hub, and routers R2, R3, and R4 are spoke routers. The Frame Relay connections will be established using Frame Relay point-to-point connections over subinterfaces from R1 to each spoke router. Routing will be established using […]
Posted in Routing, WAN Tags: CCNA, Cisco, Default Route, Frame-Relay, Labs, Point-to-Point, Routing, Scenarios, Static Route, Switching No Comments »
In this free CCNA lab, you will troubleshoot an OSPF configuration. The routers and PCs have already been loaded running configuration. These configurations contain errors that will prevent end-to-end communication across the network. You will need to troubleshoot each router to determine the configuration errors, and then use the appropriate commands to correct the configurations. […]
Posted in CCNA, OSPF, Packet Tracer, Routing Tags: CCNA, Cisco, Default Route, Labs, OSPF, Packet Tracer, Routing, Scenarios, Static Route, Summary Route, Switching 3 Comments »
