In this Free CCNA Lab you will configure three routers in a simple IPv6 configuration. Routing will be established using RIP. Finally you will use the Show and Ping commands verify and test the configuration and connectivity of the network.
Posts Tagged ‘RIP’
Free CCNA LAB Configuring IPV6 RIP
Posted by Barry on April 13th, 2012
Posted in CCNA, Packet Tracer, RIP, Routing 
Tags: CCNA, Cisco, IPV6, IPV6 Address, Lab, Packet Tracer, RIP, Routing, Scenario 
No Comments »Free CCNA Lab Basic RIPv2
Posted by Barry on January 2nd, 2012
The network shown in the above Diagram contains a discontinuous network, 172.30.0.0. This network has been subnetted using VLSM. The 172.30.0.0 subnets are physically and logically divided by at least one other classful or major network, in this case the two serial networks 209.165.200.228/30 and 209.165.200.232/30. This can be an issue when the routing protocol […]
Posted in CCNA, RIP, Routing Tags: CCNA, Cisco, Default Route, Labs, Packet Tracer, RIP, RIPv2, Routing, Scenarios, Static Route, Summary Route, Switching No Comments »Basic RIP Three Free CCNA Labs In ONE
Posted by Barry on December 25th, 2011
This Free CCNA Packet Tracer activity is really three labs in one, it covers basic RIP configuration, RIP between subnets, and RIP with a stub network. While RIP is a relativity simple routing protocol don’t discount its importance on the CCNA exam or in the real work environment. So download this lab today and learn […]
Posted in RIP, Routing Tags: CCNA, Cisco, Default Route, Labs, Packet Tracer, RIP, Routing, Scenarios, Static Route, Summary Route, Switching No Comments »Basic Wireless Configuration
Posted by Barry on November 20th, 2011
The increasing need for easy access to a company network and internet has via mobile devices has increased the popularity of wireless network and therefore increased the need for trained engineers to design and implement this new technology.